西天山特克斯达坂库勒萨依序列埃达克岩的确立及钼找矿意义

库勒萨依序列斑岩体δ平均3.05,属于钙碱性系列岛弧浅成岩。 SiO₂含量为57.06％~70.74％,高Al₂O₃、Na₂O、Sr和相对富集LREE,低MgO、Y、Yb,强烈亏损HREE。Na₂O/K₂O＞1,Sr/Y平均57.67,正Eu异常,因而具有典型O型埃达克岩特征。库勒萨依序列斑岩体与Mo异常套合好,已发现钼矿体,找矿前景良好。该埃达克岩的确立,对深化西天山区域成矿规律和指导今后找矿具有借鉴和指导意义。     

Preliminary study on different nutrient pools supplies for the phytoplankton growth in the Jiaozhou Bay in China in the fall of 2004

The source and significance of two nutrients, nitrogen and phosphorous, were investigated by a modified dilution method performed on seawater samples from the Jiaozhou Bay, in autumn 2004. This modified dilution method accounted for the phytoplankton growth rate, microzooplankton grazing mortality rate, the internal and external nutrient pools, as well as nutrient supplied through remineralization by microzooplankton. The results indicated that the phytoplankton net growth rate increased in turn from inside the bay, to outside the bay, to in the Xiaogang Harbor. The phytoplankton maximum growth rates and microzooplankton grazing mortality rates were 1.14 and 0.92 d-1 outside the bay, 0.42 and 0.32 d-1 inside the bay and 0.98 and 0.62 d-1 in the harbor respectively. Outside the bay, the remineralized nitrogen (Kr=24.49) had heavy influence on the growth of the phytoplankton. Inside the bay, the remineralized phosphorus(Kr=3.49) strongly affected the phytoplankton growth. In the harbor, the remineralized phosphorus (Kr=3.73) was in larger demand by phytoplankton growth. The results demonstrated that the different nutrients pools supplied for phytoplankton growth were greatly in accordance with the phytoplankton community structure, microzooplankton grazing mortality rates and environmental conditions. It is revealed that nutrient remineralization is much more important for the phytoplankton growth in the Jiaozhou Bay than previously believed.     

复合加载模式作用下地基承载性能数值分析

确定竖向荷载(V)、水平荷载(H)和力矩(M)共同作用下建筑物地基的破坏模式及在荷载空间(H,V,M)中的破坏包络面是地基设计中的关键问题。为提高Swipe试验方法计算精度,提出了改进方案,进而利用有限元方法分析了复合加载模式作用下均质粘性土地基上条形基础的破坏包络面。计算表明,基于改进Swipe试验方法的数值模拟结果明显好于常规Swipe试验方法。针对海洋工程中实际复合加载模式的特点,探讨了竖向荷载分量V对地基破坏模式和H-M荷载平面上的破坏包络线的影响,结果表明竖向荷载分量显著地改变了地基的破坏模式及包络线的形状。     

波浪作用下孔隙海床-管线动力相互作用分析

波浪作用下海床中的孔隙水压力与有效应力是影响海底管线稳定性的主要因素。然而,在目前的海床响应分析中一般将管线假定为刚性,并不能合理地考虑海床与管线之间的相互作用效应,同时也没有考虑土体和管线加速度对海床动力响应的惯性影响,从而无法确定由此所引起的管线内应力。为此考虑管线的柔性,分别采用饱和孔隙介质的Biot动力固结理论和弹性动力学理论列出了海床与管线的控制方程,进而采用摩擦接触理论考虑海床与管线之间的相互作用效应,基于有限元方法建立了海床-管线相互作用的计算模型及其数值算法。通过变动参数对比计算讨论了管线几何尺寸、海床土性参数对波浪所引起的管线周围海床孔隙水压力和管线内应力的影响。     

波浪作用下海床动力反应的数值分析

近海和离岸建筑物的基通常处于连续不断的小风浪作用之下，可将其变形视为弹性。基于二维广义Biot理论，提出了线性或非线性波浪作用下饱和弹性海床动力应应的时域有限元数值解法。静力平衡条件和Biot方程组成的边值方程可视为其特例，在比较算例中，数值计算得到的孔压和有效应力幅值沿海床深度的分布与解析解十分吻合。土骨架和孔隙流体的加速度对海床动力反应的影响很小。具体算例表明，线性波沿缓坡海床传播时，土层中超静孔压和有效应力幅值随之增大，有可能发生滑动坡坏。所提出的数值解法能够灵活地处理非线性波浪荷载，海底复杂地质条件和波浪沿缓坡传播等复杂情况。     

复合加载条件下吸力式沉箱基础承载特性数值分析

吸力式沉箱基础的承载特性是海洋工程结构设施建造与设计中的一个关键问题。这种新型的深水海洋基础型式,通常承受竖向上拔荷载与水平荷载的共同作用,其工作性能与设计理论远远不能满足工程实践的需要。本文采用有限元分析方法对吸力式沉箱基础的极限承载特性进行数值计算。以大型通用有限元分析软件ABAQUS为平台,通过二次开发,数值实现了Swipe试验加载方法和固定位移比分析方法,针对不同的沉箱长径比、土的强度折减系数,探讨了沉箱基础在垂直上拔荷载和水平荷载单调联合作用下的极限承载力,通过对不同荷载组合的数值计算构造了复合加载条件下沉箱基础破坏包络面。     

东海陆坡及邻近槽底天然气水合物成藏条件分析及前景

在西太平洋边缘海中,东海是唯一没有获得天然气水合物样品的边缘海。利用已有的地震资料、海底温度资料等,从沉积物来源、沉积地层厚度、烃源岩条件、沉积速率、海底温度—压力条件等方面对东海水合物成藏条件进行了分析。认为冲绳海槽沉积物源丰富,沉积厚度大,且发育烃源岩地层。冲绳海槽较高的沉积速率主要分布于冲绳海槽槽底沉积中心,以及西部陆坡连接海底峡谷底部的三角洲区域。根据冲绳海槽实测的海底温度数据,整个冲绳海槽地区600m以深的范围都能够满足水合物发育的温度、压力条件。以温度梯度为30℃/km计算,冲绳海槽中水合物稳定域的最大厚度为650m。冲绳海槽盆地中普遍发育的底辟构造、背斜构造等局部构造,以及网格状断裂系统,为烃类气流体的向上及侧向运移创造了有利条件,成为天然气水合物发育的有利区带。根据已经发现的BSR特征来看,东海地区天然气水合物前景广阔。     

西天山特克斯达坂晚古生代若干不整合的厘定及地质意义

地层不整合接触是研究地质发展历史及鉴定地壳运动特征和运动时期的重要依据。通过1：5万区域地质调查,在西天山特克斯达坂一带晚古生代地层中厘定出6个不整合面,证实区内乃至天山地区曾有过至少6幕褶皱运动,丰富了研究区的幕式褶皱内容。新确立了特克斯运动（东图津河组与科古琴山组之间的角度不整合）,证实了天山主褶皱幕是鄯善运动,是记录塔里木板块与准噶尔板块碰撞缝合的重要构造运动。特克斯运动等6幕褶皱运动为天山地区构造演化研究提供了更为详尽的幕式演化信息。     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.